Bending equipment and operators in the sheet-metal workshop

Bending

Form sheet parts to the required dimensions and geometry.

Process overview

Plan the bends, forming sequence and critical dimensions around the assembly of equipment housings, cabinets and brackets. Flat blanks become the three-dimensional structures required by the product.

Typical parts

  • Equipment cabinets
  • Metal housings
  • Brackets and mounting plates
Bending equipment and operators in the sheet-metal workshop

Process specifications

Maximum stated bending length
3.2 m
Equipment rating
100 t
Carbon steel thickness
Up to 6 mm
Stainless steel thickness
Up to 4 mm

Length, tonnage and thickness are separate specifications; their combination depends on the material and geometry.

Discuss your specifications

Manufacturing steps

  1. 01

    Review the geometry

    Confirm material, bend positions, angles and assembly relationships.

  2. 02

    Agree the sequence

    Plan forming operations around the part geometry.

  3. 03

    Form and check

    Check critical dimensions against the drawing after bending.

Frequently asked questions

Can a full 3.2 m length of 6 mm carbon steel be bent?

The length, tonnage and thickness values are separate specifications. They do not establish a combined maximum-length, maximum-thickness capability. Please submit the complete drawing for confirmation.

Which dimensions need to be identified?

Identify thickness, bend angles, flange lengths, hole-to-bend distances and critical assembly dimensions.