An operator spraying a suspended metal part inside the coating booth

Powder coating

Apply powder electrostatically and cure it into a surface coating.

Process overview

Follow pretreatment and cleaning with powder application and heat curing. Select the coating system for the substrate, appearance and operating requirements of the metal part.

Typical parts

  • Equipment cabinets
  • Metal housings
  • Brackets and structural parts
An operator spraying a suspended metal part inside the coating booth

Process specifications

Coating thickness
60–120 μm
Neutral salt spray (NSS)
More than 400 hours
Direct and reverse impact
50 kg·cm

Confirm substrate, coating system and acceptance conditions for the project.

Discuss your specifications

Manufacturing steps

  1. 01

    Prepare the substrate

    Arrange pretreatment and cleaning for the chosen coating system.

  2. 02

    Apply the powder

    Apply powder to the metal surface electrostatically.

  3. 03

    Heat-cure and check

    Cure the coating and review it against the agreed requirements.

Frequently asked questions

What is the source of these coating values?

The latest company process sheet lists 60–120 μm thickness, more than 400 hours NSS and 50 kg·cm direct/reverse impact. Substrate, coating system and acceptance conditions must be confirmed for each project.

Is one coating system used for every part?

No. Substrate, geometry, colour, operating environment and performance requirements determine the appropriate system.